公司名称：深圳市超力源科技有限公司

公司研制的9串锂电动力电池保护板，本产品严格满足ROHS规范等。This specification applies to the 9serial-cellslithium manganese battery protection board which strictly conforms to the ROHS standard.
二、应用范围Application
锂离子、聚合物锂电池等可充电锂电池包。Applies to the rechargeable Lithium battery packs and so on.
三、电气参数Electrical Characteristic (Ta = 25 ℃.)
Details详细项目 Min. Typ. Max Error Unit
Battery Gas电池类型 3.7V锂电池
Battery Link电池组组合方式 9S
Input Charging Voltage 充电电压 38.52 ±1% V
Input Charging Current 充电电流 10 12 A
Output Discharging Voltage放电电压 33.3 V
Continuous 0% 90% RH
Storage Condition
存储环境 Temperature 存储温度 -40 85 ℃
Humidity (No Water-Drop)存储湿度 0% 90% RH
Protection Parameters (for Individual Cell).保护参数（对于每节电芯）
Over-Charge Voltage Protection (OVP) 过充保护电压 4.28 ±20mV V
Over-Charge Voltage Protection Release (OVPR)过充恢复电压 4.08 ±25mV V
Over-Charge Voltage Protection Delay Time (OVPDT) 过充保护延时 0.96 1.2 1.4 S
Over-Discharge Voltage Protection (UVP)过放保护电压 2.80 ±50mV V
Over-Discharge Voltage Protection Release (UVPR)过放恢复电压 ≥2.80 V
Over-Discharge Voltage Protection Delay Time (UVPDT) 过放保护延时 Over-DischargeProtection Release过放保护恢复方式 Release load断开负载
Over-Current Discharge Protection Release放电过流保护恢复方式 Release load断开负载
Short circuit current protection短路保护电流
Short circuit current protection delay time短路保护延时 200 320 600 uS
Short circuit protection Release短路保护恢复方式 Release load断开负载
charging / Discharging Protection Temperature充/ 放电保护温度 ─ ℃
charging / Discharging Temperature Release充/ 放电恢复温度 ─ ℃
charging balance protection Temperature充电均衡保护温度 ─ ℃
charging balance protection TemperatureRelease充电均衡恢复温度 ─ ℃
Cell balance均衡
Bleed S