公司名称：东莞市万江拓创电子厂

厂商： Young Chang Silicone Co.,Ltd
品牌： STLZW-B

186
1. APPLICATIONS

This specification is to be applied for Triple Insulated Litz Wire (SZW-B; hereinafter referred to as the "wire") using the winding or the wiring such as high-frequency operating electrical machine and apparatus


2. STRUCTURE

2.1 CONDUCTOR

The conductor shall be used the enameled stranded copper wire specified in KS C 2611-1997 or JIS C 2529-1991.

2.2 INSULATION

The insulation covering shall consist of triple extruded layer (1st and 2nd layer: polyester type resin, 3rd layer: thermally reinforced polyamide) which are at least equivalent thereto in quality, extruded on the surface of the conductor uniformity. The insulation layers so applied shall have no detrimental effect to the conductor and shall show no flaws or dirt. Further, the wires shall be such that the soldering is possible without removing of the insulation layer. The wire shall be satisfied with B rated (130 °C) thermal index of IEC 172 and UL SUBJECT 2353 test condition.

2.3 COLOR

The color of the wire is basically yellow. Other colors are available on request.

3. CHARACTERISTICS

The characteristics of wire shall be satisfied with Appendix 2 value accordance with the requirements for Section 4. Other requirement of characteristics than those covered by this specification shall be as given in IEC 60950 3rd edition-1999 (Safety of information technology equipment including electrical business equipment) sub -clause 2.10.5.4 and Annex U. The rating voltage shall be 1,000Vrms and the insulation grade shall be the reinforced (withstand test voltage 3,000Vrms for 1min).

由于文字太多无法一一说明
如有疑问请联系我们 谢谢