公司名称：胶水公司

乐泰 480平板电脑/笔记本ipad专用胶水，乐泰胶水

技术服务热线：021-51693135 / 021-22818476

乐泰® 480™ is a rubber toughened adhesive with increased flexibility and peel strength along with enhanced resistance to shock. NSF International Certified to ANSI/NSF Standard 61 for use in commercial and residential potable water systems not exceeding 82° C. Note: This is a regional approval. Please contact your local Technical Service Center for more information and clarification. TYPICAL PROPERTIES OF UNCURED MATERIAL Specific Gravity @ 25 °C 1.05 Flash Point - See MSDS Viscosity, Cone & Plate, mPa•s (cP): Temperature: 25 °C, Shear Rate: 1,000 s -1 100 to 200LMS Viscosity, Brookfield - LVF, 25 °C, mPa•s (cP): Spindle 1, speed 6 rpm 100 to 200 TYPICAL CURING PERFORMANCE Under normal conditions, the atmospheric moisture initiates the curing process. Although full functional strength is developed in a relatively short time, curing continues for at least 24 hours before full chemical/solvent resistance is developed. Cure Speed vs. Substrate The rate of cure will depend on the substrate used. The table below shows the fixture time achieved on different materials at 22 °C / 50 % relative humidity. This is defined as the time to develop a shear strength of 0.1 N/mm2. Fixture Time, seconds: Steel (degreased) 60 to 120 Aluminum 10 to 30 Zinc dichromate 50 to 150 Neoprene
乐泰®
480™是一种橡胶增韧粘合剂
增加柔韧性和剥离强度
耐冲击。
NSF国际
符合ANSI / NSF标准61，用于商业和
住宅饮用水系统不超过82摄氏度。注：
这是一个区域批准。请联系您当地的技术人员
服务中心了解更多信息。
固化材料的典型特性
比重@ 25°C 1.05
闪点 - 参见MSDS
粘度，圆锥和平板，mPa•s（cP）：
温度：25°C，剪切速率：1,000 s
-1 100到200LMS
粘度，Brookfield-LVF，25℃，mPa•s（cP）：
主轴1，转速6 rpm 100〜200
典型的固化性能
在正常条件下，大气水分开始
固化过程。虽然功能强大，功能强大
在相对较短的时间内，治愈持续至少24小时
在完全耐化学性/耐溶剂性之前。
固化速度与底物
固化速率将取决于所用的底物。桌子
下图显示了