公司名称:深圳市骏塑科技有限公司

联系人:李军 先生 (经理)

电话:136-86821512

传真:

手机:13686821512

路博润ESTANE 2103-90AE 高强度聚醚TPU

发布时间:2024年08月28日

详细说明

路博润ESTANE 2103-90AE 高强度聚醚TPU

Technical Data Sheet Type: Estane? 2103-90AE is a thermoplastic polyurethane elastomer. 1 Typical properties; not to be construed as sales specifications. Fabrication conditions, part design, additives, processing aids, finishing materials and use conditions can all affect the integrity, performance and regulatory status of finished goods. 2 Tests conducted on 0.126 inch (3.2mm) injection molded specimen, unannealed, unless noted. Properties Test Method English S.I. Valuest Units Valuest Units Physical(1) Shore Hardness ASTM D 2240 90 47 A D 90 47 A D Specific Gravity ASTM D 792 1.14 1.14 Melt Flow Rate, 224° C/8700g ASTM D 1238 - g/10min 7 g/10min Taber Abrasion, Wt Loss, 1000g wt 1-1000g, H-22 (coarser) ASTM D 1044 - mg 50 mg Mold Shrinkage, Transverse direction ATSM D 955 0.4-0.6 % 0.4-0.6 % Mold Shrinkage, Flow direction ATSM D 955 0.5-0.7 % 0.5-0.7 % Mechanical(2) Tensile Modulus -50% elongation -*** elongation -300% elongation ASTM D 412 920 1400 2600 psi psi psi 6.3 9.7 17.9 MPa MPa Mpa Ultimate Elongation ASTM D 412 530 % 530 % Ultimate Tensile Strength ASTM D 412 5540 psi 38.2 Mpa Elongation Set After Break ASTM D 412 60 % 60 % Tear Strength, Die C ASTM D 624 760 PLI 133 KN/m Compression Set, Method B -22 hrs @ 25° C -22 hrs @ 70° C ASTM D 395 25 40 % % 25 40 % % Flexural Modulus ATSM D 790 10,000 psi 65.9 MPa Thermal Vicat Softening Point (120° C/hr, 9.8N) ASTM D 1525 195 o F 90.6 o C Glass Transition Temperature DSC -29 o F -34 o C CLTE, in-flow ASTM D 696 86.1 in/in/ o F 155 mm/mm/

深圳市骏塑科技有限公司


联系人:李军 先生 (经理)
电 话:136-86821512
传 真:
手 机:13686821512
地 址:中国广东深圳市深圳宝安区沙井镇新桥第三工业区
邮 编:
网 址:http://szsjskj168.qy6.com.cn(加入收藏)