公司名称：福州浩威诚商贸有限公司

油壓機械式機構，高穩定性
Oil Pressure Mechanical Structure
High Stability

*確認拉力計規格是否與主軸夾爪的規格相對應。
* Check the specification of pull force gauges should
correspond the specification of spindle clamping unit.

*量測環境溫度需控制在室溫25±1℃內。
*Measuring environment’s temperature should be controlled within 25 ± 1℃.

*將拉力計及主軸前端錐度部位擦拭乾淨後，夾持拉力計即可。
* Clean the pull force gauges and front-end taper parts and then
clamp the pull force gauge.

1)HSK63A/E拉力計的調整方式如左圖所示：
Adjustment of HSK63A/E pull force gauge shown on the right.

2)為確保量測數值的正確性，拉力計須在有預拉的情況下使用。
To ensure the accuracy of measurement the pull force;
gauge has to be used in the pre-pull condition.


3)實測拉力：以指針所指外圈之數值X10，即為實測拉力(kg-f)
The finger indicated the value of the outer ring X 10;
the value is pull force measured